26
Operating the camera
Duplicate characters
Puts up to 4 of the identical subject in the same taken scene into one photo.
Panorama
Use this mode to create a panoramic photo from multiple shots. You can combine several shots into
one single image quickly and easily.
OK
NG
1. Set the mode dial to
.
2. Press
>
3. Use up / down of the 4-way control to select
Duplicate Characters
( ).
4. Press
to confirm the setting.
5. Setting the camera on a tripod is strongly
recommended.
6. Press shutter to begin the multi-exposed shot with the
first gesture.
7. Press shutter to take another shot with a different
gesture for up to 4 takes in total, or press
to finish
and press
to cancel. Do not have subjects too
close or overlap.
• Takes pictures with a tripod for the best outcome.
• After the first photo is taken, the zoom ratio will be locked until the shooting finished.
• Only will the last taken subject remain if subjects are too close or overlapped.
• Press
and use left / right of the 4-way control to select settings for direction, white balance, and color
mode. Press
to apply the setting.
• Please follow the direction setting in
Left-to-Right
/
Right-to-Left
while taking the multi-exposed shot.
• Scenes will be taken based on 1280 x 720 pixels, but its actual size depends on the panoramic angle and
stitching result.
• The actual size of stitched image varies from due to the panoramic angle and stitching result as well as the level
of camera shaking.
• The direction is automatically detected. Once detected, a direction icon (indicating the direction) and a yellow
line (for keeping moving straightly) appear. In addition, a shooting bar is displayed to indicate the shooting
position.
• Press
and use left/right of the 4-way control to select metering setting and color modes. Press
to
apply the setting.