User’s Manual
Appendix 23
Connecting the Box
Please follow the instructions here to place the AV box:
To attach the AV box to the unit
：
1. Precisely place the two chocks at the lower surface of
the AV box into the lower slots in the correspondent
position in the projector.
2. Slowly push the box to fit the unit and, meanwhile,
insert the box plug into the A/V connector closely.
3. Plug in the correct cord into the correspondent jack or
port to perform A/V function.
4. Select inputs by pressing “Source” key, and select
channel by the channel up or down keys.
Figure 32 Connecting the Box
Figure 30 Bottom View of AV box
Figure 31 Side View of AV box
