15
Positioning your projector
Correcting keystone
Keystoning refers to the situation where the projected image becomes a trapezoid due to angled
projection.
• To automatically correct this:
1. Press
/
on the projector or
/ / on the remote control.
2. After the
Keystone
correction page appears, press and hold the
MODE
key on the projector for
2 seconds to automatically correct the keystoning problem.
• To manually correct this:
1. Press
/
on the projector or
/ / on the remote control.
2. After the
Keystone
correction page appears, press
/ to correct keystoning at the top of the
image. Press
/ to correct keystoning at the bottom of the image.
Press
/
.
Press
/
.
