32 Menu
operation
User Mode
Management
There are 2 user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the
User
1/User 2
) as a starting point and customize the settings.
1. Go to
Picture
>
Picture Mode
.
2. Press / to select
User 1
or
User 2
.
3. Press
to highlight
User Mode Management
and press
OK
.
4. Highlight
Load Settings From
and press
OK
.
5. Press
to select a picture mode that is close to your need.
6. When done, press
OK
and
BACK
to return to the
Picture
menu.
7. Press to select other submenus you want to make changes and use / to
adjust the values. The adjustments define the selected user mode.
•
Rename User Mode
Select to rename the customized picture modes (
User 1
or
User 2
).
1. Go to the
Picture
>
Picture Mode
menu, select
User 1
or
User 2
.
2. Press
to select
User Mode Management
.
3. On the
User Mode Management
window, select
Rename User Mode
and
press
OK
.
4. On the
Rename User Mode
window, use / / / to select desired
characters for the selected mode.
5. When done, press
OK
and
BACK
to exit.
Brightness
The higher the value, the brighter the image. Adjust this control so the black areas
of the image appear just as black and that detail in the dark areas is visible.
Contrast
The higher the value, the greater the contrast. Use this to set the peak white level
after you have previously adjusted the Brightness setting to suit your selected input
and viewing environment.
Color
Lower setting produces less saturated colors. If the setting is too high, colors on
the image will be overpowering, which makes the image unrealistic.
Tint
The higher the value, the more greenish the picture becomes. The lower the value,
the more reddish the picture becomes.
Sharpness
The higher the value, the sharper the picture becomes.
