38 Maintenance
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by
the built-in timer. The method of calculating the equivalent lamp hour is as follows:
1. Light Usage Time = (x+y+z+a) hours, if:
Time used in Normal mode = x hours
Time used in Eco mode = y hours
Time used in SmartEco mode = z hours
Time used in LampSave mode = a hours
2.
Equivalent Lamp Hour =
hours
, if
X= lamp life spec of Normal mode
Y= lamp life spec of Eco mode
Z= lamp life spec of SmartEco mode
A= lamp life spec of LampSave mode
A’ is the longest lamp life spec among X, Y, Z, A
To obtain the lamp hour information:
1. Go to
Advanced Menu - Settings
>
Lamp Settings
and press
OK
. The
Lamp Settings
page
appears.
2. Press
to select
Lamp Timer
and press
OK
. The
Lamp Timer
information is displayed.
You can also get the lamp hour information on the
Information
menu.
For time used in each lamp mode shown in OSD menu:
• Time used is accumulated and rounded down to an integer in
hours
.
• When time used is less than 1 hour, it shows 0 hours.
When you calculate Equivalent Lamp hour manually, it will probably have deviation from the value shown in OSD
menu since projector system calculates time used for each lamp mode in “Minutes” then rounds down to an integer
in hours shown in OSD.
α
α
A
'
X
----
x
χ
A
'
Y
----
x
y
A
'
Z
----
x
z
A
'
A
----
x
a
+
+
+
=
