FCC/Industry Canada Notice
142
Ben
Q
2006, Z:\SL
91_ONYX\ou
tput
\FUG\ON
YX_FCC_am_060911_t
e\FM\
STD_FDA
_
FCC_am.fm
left page (142)
of ONYX SL91 FCC am, (11.09.2006, 11:58)
Te
m
p
lat
e: Minion
, 140x105 mm, Ve
rsi
o
n 2.0;
VAR Language: am;
VAR issue
date: 060711
FCC/Industry Canada Notice
Your phone may cause TV or radio
interference (for example, when using a
telephone in close proximity to
receiving equipment). The FCC or
Industry Canada can require you to stop
using your telephone if such
interference cannot be eliminated.
If you require assistance, please contact
your local service facility.
Statement required by 15.19 and
RSS210
This device complies with Part 15 of the
FCC Rules and with RSS-210 of
Industry Canada.
Operation is subject to the following
two conditions:
(1)
this device may not cause
harmful interference, and
(2)
this device must accept any
interference received, in-
cluding interference that
may cause undesired opera-
tion.
Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
For body worn operation, this phone
has been tested and meets the FCC RF
exposure guidelines for use with an
accessory that contains no metal and
that positions the handset a minimum
of
1.0 cm
from the body. Use of other
enhancements may not ensure
compliance with FCC RF exposure
guidelines. If you do not use a body-
worn accessory and are not holding the
phone at the ear, position the handset a
minimum of
1.0 cm
from your body
when the phone is switched on.
