Benning 044166, Operating Manual, Page: 7 / 22

Introduction
1.2 History
5186 / 07/2021 en BENNING CC 4-1 / CC 4-2 7
The devices are subject to continuous further development. Benning reserves the right to make
changes to the device’s design, configuration and technology. The information in this operating
manual corresponds to the state of technical knowledge at the time of printing. For this reason,
no claims for certain device characteristics can be derived from the contents of this operating
manual.
Information in this operating manual can be changed at any time without prior notice. Benning is
not obligated to make amendments to this operating manual or to keep it up to date.
Direct any technical questions to Technical Support [
}
page 7].
Trademarks
All trade marks that are used are the property of their respective owners, even if they are not
separately marked as such.
1.2 History
Release number Amendments
07/2021 • Initial release
Table 1: History
1.3 Service & support
Please contact your specialty retailer or the BENNING Service Center for any repair or service
work that might be required.
Technical support
Please contact our Technical support for technical questions on handling the device.
Phone: +49 2871 93-555
Fax: +49 2871 93‑6555
E-Mail: helpdesk@benning.de
Internet: www.benning.de
Returns management
Easily and conveniently use the BENNING returns portal for a quick and smooth returns
processing:
https://www.benning.de/service-de/retourenabwicklung.html
Phone: +49 2871 93-554
E-Mail: returns@benning.de
Return address
BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Retourenmanagement
Robert-Bosch-Str. 20
D - 46397 Bocholt