Bennett HIGH FLOW H35, Instruction Manual

Page: 70 / 98

Diagnostics
Bennett HF H35 Instruction Manual 66
DIAGNOSTIC’S CODE 1 – DISPLAY SEGMENT TEST
The display segment test is used to identify failed segments in the main displays or the individual price per mass (IPPM) displays.
1. To enter the display segment test. Press the 1 button on the keypad and
the Enter button.
•
The main sales display window will say,
PRESS ENTER
as shown in
Figure 5.5a Press the Enter button to begin.
•
The main display and the individual PPM displays begin to display all
dashes as shown in
Figure 5.5b .
2. Each time the Enter button is selected a new set of segments will be
displayed. The displays will flash until the Cancel button is pushed to exit
this code.
3. Press the Cancel button to exit this code.
4. Press the Cancel button twice to exit Diagnostics.
Sale $
p r e s s
Kilograms
E N t E r
---- ----
Figure 5.5a – Display Segment
Sale $
------------
Kilograms -------
---- ----
Figure 5.5b – Dash Display Segment