Bennett CNG Spec.100 Series Operators Manual
Diagnostics
48
DIAGNOSTIC’S CODE 7 – KEYBOARD, SWITCH, AND BEEPER TEST
This code is used to test the switches for the product buttons and the buttons on the programming keypad.
Note:
Test the
Cancel
button
last.
1.
Enter diagnostics and press the
7
button on the keypad and the [
ENTER
] button.
The display shown in
Figure 5.21
appears.
During this test, the dispenser emits a tone when each button on the keypad
is pressed. The name of the button appears in the top line of the display.
If no tone is heard, the button or key failed the test. The main display shows
the name of the last button pressed.
2.
Press the [
CANCEL
] button twice to exit this test.
3.
Press the [
CANCEL
] three times to exit Diagnostics.
DIAGNOSTIC’S CODE 8 – LAST SALE LIMIT
This code is used to view the sale limit of the last ten sales. The last sale limit type and limit amount are displayed for the selected side as
shown in
Figure 5.22
. Money limits are shown with two decimal digits and mass limits are shown with three decimal digits. Diagnostic
mode 8 is intended for decimal mode 0 and GGE.
Limit Type:
2 = Money Limit
3 = Volume Limit
1.
Enter diagnostics and press the
8
button on the keypad and [
ENTER
].
2.
Press the
Enter
button to view the number of sales in descending chronological
order.
3.
Press the [
CANCEL
] button to exit this test.
4.
Press the [
CANCEL
] button twice to exit Diagnostics.
FIGURE 5.21 - AUDIO TONE TEST
FIGURE 5.22 – LAST SALE LIMIT
Sale $
Press
GGE
prod
Diag
---7
Sale $
Type
GGE
0000
Diag
---8
Summary of Contents for CNG Spec. 100 Series
Page 3: ...Bennett CNG Spec 100 Series Operators Manual Bennett Limited Warranty i...
Page 4: ...Bennett CNG Spec 100 Series Operators Manual ii Page Intentionally Left Blank...
Page 46: ...Bennett CNG Spec 100 Series Operators Manual Programming 40 Page Intentionally Left Blank...
Page 56: ...Bennett CNG Spec 100 Series Operators Manual Diagnostics 50 Page Intentionally Left Blank...
