IDA-1
2020-07-08
Bennett & Ross IDA-1 / ArtNr.: 00054829
19
10.3 Testing the Network when Starting
1. Choose
„Network“
in the settings and confirm your choice.
2. Choose
„Proof network when starting“.
3. Choose
„
Activate
“ or „
Deactivate
“.
11. Special Functions
11.1 Setting the Alarm Clock
The radio has three different alarm clocks: two standard alarm clocks and one
snooze alarm clock.
-
If an alarm clock is active it will be shown in the menus.
1. Open the menu
Settings/AlarmClock
.
2. Via turning the scrolling wheel you can choose one of the following 4
points. Your choice will be activated by pressing the scrolling wheel:
-
Alarm Clock 1: On starts the alarm clock and opens the next menu.
Off
: turns the alarm clock off. Settings do not change.
-
Alarm Clock 2: On starts the alarm clock and opens the next menu.
Off
: turns the alarm clock off. Settings do not change.
-
Snooze Alarm Clock: 5, 10, 20, 30, 60, 90, 120.
The alarm clock sounds after
a previously selected amount of time.
Off
: Snooze alarm clock is not activated.
-
Alarm Clock Volume:
Adjust the volume of the alarm clock here.
3. Make your choice by turning and pressing the scrolling wheel.
4. If you have activated
Alarm Clock 1
or
Alarm Clock 2
a new menu will
open. Here you can choose:
-
Repeat:
Choose between daily, once or individual weekdays on which
the alarm clock is supposed to be active. Your choice will later appear
in the display of the alarm settings.
-
Time:
Set the wake-up time.
-
Source: Melody:
Choose if the alarm clock is to wake you with a beep, a
melody or a radio station program.
5. Put the radio into standby mode. You will be woken up at the set time. The
volume of the wake-up sound will slowly increase.
11.2 Language
The display information can be viewed in different languages. This menu allows you
to change the languages.
-
Choose a language by turning the scrolling wheel and confirm by pressing it.
11.3 Dimmer
1. Choose the sub-menu Dimmer in the settings.
2. Choose between
Energy Saving Mode
and
Turn On
.
