BeneVision TMS60, Operator'S Manual

Page: 130 / 250

Monitoring at the CMS (Version Earlier than 03.00) Monitoring with the TMS60 at the CMS
12 - 12 TMS60 Operator’s Manual
3. Select Exit to save the settings and close the Analysis Lead Setup menu.
Other Settings
In the HR section of the ECG tab, select Other Settings . The Other Settings menu dis-
plays.
The following table lists all settings in the Other Settings menu.
12.2.2.3 ECG Display
The ECG digital area displays:
1. Parameter label
2. HR value
3. High HR alarm limit
4. Low HR alarm limit
5. Pauses threshold
6. Pauses per minute value
7. Pauses per minute label
8. PVCs threshold
9. PVCs per minute value
10. PVCs per minute label
Options Description Settings*
Paced The option is unavailable at the CMS. The paced status can be set at the TD60 only.
Refer to
"Setting the Paced Status" on page 7 - 10 for details.
Pacer Reject Configures whether or not to reject the pace
pulses.
■
On : the pace pulses are not counted as
extra QRS complexes.
■
Off : the pace pulses are not rejected.
On, Off
This Pacer Reject option is only available when Paced is set to Yes at the TD60.
Filter Configures the ECG filter in all operating
modes.
■
Monitor : use under normal
measurement conditions.
■
ST : use when the ST monitoring is
applied.
Monitor , ST
* The factory default settings are in bold.