BeneVision TM80, Operator'S Manual

Page: 78 / 240

7 - 12 BeneVision TM80 Telemetry Monitor Operator’s Manual
2. Tap the icon to exit the ECG menu.
7.4.3 ECG Leadwire Types
ECG leadwire type has three options as follows:
■ Auto : the device automatically sets the leadwire type according to the leads
connected.
■
3 Lead : the leadwire type is set to 3 lead.
If the leadwire type is set to 3-lead, the Smart Lead option becomes Monitored
Lead . You can select the desired lead from the Monitored Lead option to set the first
ECG waveform displayed on the main screen.
■
5 Lead : the leadwire types is set to 5 lead.
The option displays Smart Lead .
All waveform leads display on the main screen.
Drag the switch to right or left to enable or disable the Smart Lead function.
■ 6 Lead : the leadwire types is set to 6 lead.
If the leadwire type is set to 6 lead, there will be two options Va and Vb displayed
under Cable Type .
◆
Va options: Va, V1, V2, V3, V4, V5, V6. Va is the default.
◆
Vb options: Vb, V1, V2, V3, V4, V5, V6. Vb is the default.
7.4.4 Configuring ECG Waveforms
To configure ECG waveforms, follow this procedure:
1. In the Waveform section of the ECG menu, select the options described in the fol-
lowing table.
Filter Selects the ECG filter.
■
Monitor
Used under normal measurement
conditions.
■
ST
Used when ST monitoring is
applied.
Monitor , ST
Color Selects the color of ECG numeric
data and waveform. 16 colors
The default color is green.
Options Description Settings*
* The factory default settings are in bold.