Operation Manual
EL320.240.36-HB Display
Beneq Oy
Olarinluoma 9
Tel. +358 9 7599 530
VAT ID FI19563372
FI-02200 Espoo
Fax +358 9 7599 5310
www.beneq.com
Finland
www.lumineq.com
Date: February 13, 2017
Document number: ED000812C
Page | 13
3.13
Mechanical characteristics
Table 8. Mechanical characteristics
Display external dimensions
millimeters (inches)
width
148.1 (5.83)
height
104.7 (4.12)
without locking connector
depth
20 (0.8)
with locking connector
Weight (typical)
183 g (6.3 oz)
Fill factor
74%
Display active area
millimeters (inches)
width
115.1 (4.5)
height
86.3 (3.40)
Pixel size
width
0.31 (0.012)
height
0.31 (0.012)
Pixel pitch
millimeters (inches)
Width
0.36 (0.014)
Height
0.36 (0.014)
3.14
Component envelope
The component envelope shown in Figure 4 illustrates the distance the components extend
behind the display. Tall components do not necessarily fill this area. Beneq reserves the right
to relocate components within the constraints of the component envelope without prior
customer notification. For this reason, Beneq advises users to design enclosure components
to be outside the component envelope.
Device designers will need to consider their specific system requirements to determine the
spacing necessary to maintain the specified ambient temperature.
Air flow and surrounding component materials will affect the depth of the air gap.
