beneq EL640.400-C2, Operation Manual

Page: 10 / 23

Operation Manual
EL640.400-C2, -C3 and -
CD3 Display
Beneq Products Oy
Olarinluoma 9 Tel. +358 9 7599 530 VAT ID FI25115461
FI-02200 Espoo Fax +358 9 7599 5310 www.beneq.com
Finland lumineq@beneq.com www.lumineq.com
Date: September 23, 2014 Document number: ED000821B Page | 10
4.2 Support timing modes
Table 5. Supported timing modes
VGA
mode
Type Text
format
Char.
box
Vsync
freq.
(Hz)
Pixels
(software)
Double
scan
Border
size
H V
0, 1 text 40 x 25 8 x 8 70 320 x 200 Yes 0 7
2, 3 text 80 x 25 8 x 8 70 640 x 200 Yes 8 7
0*, 1* text 40 x 25 8 x 14 70 320 x 350 No 0 6
2*, 3* text 80 x 25 8 x 14 70 640 x 350 No 8 6
0+, 1+ text 40 x 25 9 x 16 70 360 x 400 No 0 7
2+, 3+ text 80 x 25 9 x 16 70 720 x 400 No 9 7
4, 5 graph 40 x 25 8 x 8 70 320 x 200 Yes 0 7
6 graph 80 x 25 8 x 8 70 640 x 200 Yes 8 7
7 text 80 x 25 9 x 14 70 720 x 350 No 9 6
7+ text 80 x 25 9 x 16 70 720 x 400 No 9 7
D graph 40 x 25 8 x 8 70 320 x 200 Yes 0 7
E graph 80 x 25 8 x 8 70 640 x 200 Yes 8 7
F graph 80 x 25 8 x 14 70 640 x 350 No 8 6
10 graph 80 x 25 8 x 14 70 640 x 350 No 8 6
13 graph 40 x 25 8 x 8 70 320 x 200 Yes 0 7
Normal
mode
graphics 72 max 640 x 400
NOTES:
The top and right borders’ border values are used for image centering to the display matrix.
In VGA modes 0+, 1+, 2+, 3+, 7 and 7+, the character box is narrowed to 8 pixels by
omitting the data of every 9th pixel.
In VGA modes 0, 1, 0*, 0+, 1+, 4, 5, D and 13 where the software uses 320 or 360 columns,
the size of borders may vary from one VGA controller card to another. The potentially needed
picture adjustments may be done by programming the registers of the VGA controller chip.
Double Scan is a VGA card feature.
VGA modes 11 and 12 with 480 rows are not supported.