BENEKOV K14, Operation And Installation Manual

Page: 14 / 42

- 14 -
•
The Hall probe is a part of the fan and it detects its revolutions. If there is an unscheduled stop of the
fan the programmer immediately interrupts the fuel supply from the store. This is a non-returnable alarm
that can only be removed by the user.
4.5. Boiler accessories
Standard accessories:
•
the boiler operating and installation manual which includes the Warranty Certificate
•
operating instructions for the boiler programmer
•
addendum to the BENEKOV boiler operating and installation instructions - Installing the fuel store for the
BENEKOV K14, K20 and K25 boilers
•
list of contractual service organizations
•
ceramic parts - see chap. 6.2.
•
ash drawer
•
cleaning rake
Optional accessories:
•
Boiler remote control with ecoSTER200 room panel function
Optional accessories are not included in the basic price of the boiler!
5. Boiler placement and installation
5.1. Regulations and directives
The solid fuel boiler may only be installed by a company with valid installation licence.
The heating project must be designed in accordance with valid regulations.
The heating
system must be filled with water that meets the requirements of ČSN 07 7401: 1992; in particular
the hardness of the water must not exceed the required parameters .
Chart 4 Heating water parameters
Parameter Unit Value
Hardness mmol/l 1
Ca
2+
mmol/l 0,3
Fe + Mg total concentration mg/l 0,3 (recommended value)
Regulation and directive relating to:
A) heating circuit
ČSN EN 303-5:2013
Boilers for central heating - Part 5: Boilers for central heating using solid
fuels, with manual or automatic delivery, with a rated thermal output not
exceeding 500 kW - Terminology, requirements, testing and marking
ČSN 06 0310:2014
Heat systems in buildings
– Design and Installation
ČSN 06 0830:2014
Heat systems in buildings
– Safety devices
ČSN 07 7401:1992
Water and steam for thermal power equipment with working pressure up to 8
MPa
B) chimney