PART B: CONFIGURING SETTINGS FOR THE SERAPH
22 SERAPH SETTINGS: EMERGENCY
SETTING CONFIRMATION FOR EMERGENCY
REPORT DELIVERY
By checking the
Resend unconfirmed reports
box (9), you can
request
a confirmation
just to make sure that someone has
received an emergency report. The device will resend the
emergency reports until it receives a confirmation of the
successful delivery.
By selecting a value in
Resend timeout
data field, you can
specify
the waiting time,
i.e. for how long a time the device
waits for the confirmation before trying to reach some other
emergency report number (9a).
NOTE: This feature is not supported in all control systems.
Using this feature in a system which does not support it can
lead to massive resending of messages and high charges.
SETTING DISPLAY NOTIFICATIONS
To make the device to display emergency cycle notifications,
check the
Display notifications
box (10). This way you can
see clearly how the emergency cycle is proceeding.
If you want the device to make discreet emergency cycle
with no lights, or display notifications on, leave the check
box blank. Moreover, to make it also silent, leave the
Play
tones
check box blank (see below).
SETTING CALL NUMBER MASK
You can name the emergency cycle as you like (11). This is
the way to mask the real phone number to which you are
calling.
The "nickname" will be displayed during an emergency
cycle.
SETTING EMERGENCY TONES
To make the device to play tones during an emergency cycle,
check the
Play tones
box. This way you can hear how the
emergency cycle is proceeding.
If you want the device to make silent emergency call, leave
the
Play tones
check box blank (12). To make it also show
no lights or emergency displays, leave the
Display notifica-
tions
box blank (see above).
SETTING VIBRATION
By checking the box, the device will vibrate during an emer-
gency cycle. Vibration can be used concurrently with emer-
gency cycle tones, or instead of them.
Vibration is not in use if the check box is left blank (13).
