P-9000LT/F Low-Rise Pit Lift
17
P/N 5900022 — Rev. B — Nov. 2019
4.
Measure the distance between the two Platforms at points
a
and
b
; the two Platforms need to be
the same distance apart at both ends.
Important
: If
a
and
b
are
not
the same, adjust the Frames;
a
and
b
must
be the same distance
apart and parallel to the Pit.
5.
When the Platforms are in the correct location, they can be anchored into place.
Lift the Platforms Off the Bases
You must raise the Platforms off the Bases in order to anchor the Lift and connect the Hydraulic Hoses
and the Return and Air Lines. Raising the Platforms off the Bases gives you room to work.
When you raise the Lift, make sure to engage it on a Safety Lock.
⚠
WARNING
BendPak strongly recommends using at least three people to lift the Platforms off
the Bases: one person on each end to hold down the Base and one person to
operate the Forklift or Shop Crane to raise the Platform. Use
care
when raising the
Platforms off their Bases; they are heavy and can be difficult to hold.
To lift the Platforms off the Bases
:
1.
Position one person at each end of a Platform you want to raise off the Base.
These two people need to hold down the Base while the Platform is raised.
Only raise one Platform at a time
.
2.
Have the third person use a crowbar or other device to create separation between the Platform
and the Base.
Make sure the Base is held down while you create the separation between Platform and Base.
3.
Once the Platform and Base are separated by more than .5 inch (~13 mm), put industrial slings
(straps) around each end, attach them to a lifting device such as a Forklift or Shop Crane, then
continue raising the Platform off the Base.
The Base still needs to be held down as the lifting device raises the Platform.
4.
When the Platform gets above the top Safety Lock, lower it back down onto the top Safety Lock.
Do not raise the Platform a random distance; leave it on the top Safety Lock.
5.
Perform the same procedure on the second Platform and Base.
Summary of Contents for P-9000LT
