AV8OR User’s Guide
Aviation Mode Operation
System Setup Function
Pub. No D200803000008 Page 3-142 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
•
Max – The maximum range that the feature will show on the
map. If the range on the selected map page is set higher than
the Max setting, the feature does not show on the map page.
•
Label - The maximum range that the label for the feature will
show on the map. If the range on the selected map page is set
higher than the Label setting, the label does not show on the
map page.
Tap the
CHANGE MAP
soft key to display the list of map layers
as
shown in the figure below
. Select the desired map or chart and then
tap the
SELECT
soft key to select that layer and return to the Map
Features page.
Figure 3-177: Map System Setup -- Select Map Layer
The next three features screens are each accessed in sequence by
repeatedly tapping the
NEXT
soft key. The
NEXT
soft key on the last
page loops back to the first page.
Figure 3-178: Map System Setup – Line Feature Setup
