AV8OR User’s Guide
Aviation Mode Operation
System Setup Function
Pub. No D200803000008 Page 3-141 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
away from the destination WPT, then the system zooms out
automatically to keep the WPT within the display area. When
auto zoom is in operation AUTO (Automatic) is shown in the
RNG (Range) display field. Pushing either the ZOOM IN or
ZOOM OUT soft key cancels the auto zoom capability. Auto
zoom is re-activated in this menu.
•
Minimum Elevation:
Controls the high definition terrain
contours minimum level elevation. When altitude units are set
to meters the options are: SEA LEVEL, 300M, 500M, 900M
and 1200M. When altitude units are set to feet, the options
are: 1000ft, 2000ft, 3000ft and 4000ft.
•
Maximum Elevation:
Controls the high definition terrain
contours maximum level elevation. The options are: 500M,
750M, 1000M, 1250M, 1500M, 1750M, 2000M, 2250M,
2500M, 3000M and MAXIMUM. When altitude units is set to
feet, the options are: 1500ft, 2000ft, 2500ft, 3000ft, 4000ft,
5000ft, 6000ft, 7000ft, 8000ft, 9000ft and Maximum.
There are four groups of features for each of the map layers.
They are: Point Features, Line Features, Airspace and Overlay.
Tapping the
NEXT
soft key displays the First feature screen:
Point Feature Setup,
as shown in the figure below
.
Figure 3-176: Map System Setup – Point Feature Setup
Each of the four Feature pages has the following four columns:
•
Feature – Feature Description
•
Icon – A graphical representation of the Feature
