AV8OR User’s Guide
Aviation Mode Operation
Messages Function
Pub. No D200803000008 Page 3-135 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
This page allows the user to enter the following parameters: Ground
Speed, Magnetic Heading, Desired Track (DTK), Calibrated Air
Speed (CAS), Outside Air Temperature (OAT) and Indicated Altitude..
After these parameters are entered, the unit calculates Wind
Speed / Angle and True Air Speed (TAS). If the Wind data window is
selected, the Wind Speed and Direction are displayed in the window.
The Ground Speed, Track and Indicated Altitude parameters are
automatically entered by the program.
Enter the Magnetic Heading, Calibrated Air Speed and Outside Air
Temperature to enable the Wind calculation function to calculate the
winds speed/angle and True Air Speed. Double tap on each field or
tap on each field to highlight it and tap the
EDIT
soft key to display a
numeric entry keypad as shown in the figure below.
Figure 3-171: Enter Magnetic Heading
Enter the correct value and tap the
Enter
button to accept the
value.
