AV8OR User’s Guide
Aviation Mode Operation
Flight Plan Function
Pub. No D200803000008 Page 3-66 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Figure 3-77: Flight Plan – User Waypoint List
The user can tap the
NEW WPT
soft key to define a new WPT. A
maximum of 1000 user WPTs can be created.
The user can also tap the
EDIT WPT
soft key to edit the selected
WPT’s parameters. When the user creates a new WPT or edits an
existing WPT, the User Waypoint Edit page is displayed
as shown in
the figure below
.
Figure 3-78: Flight Plan – New/Edit User Waypoint
The AV8OR system creates a default: Ident name, Icon, Position,
Comment 1 and Comment 2 parameters for the new WPT. The
default Ident name is in the format USRXXX and the default position
is the current aircraft’s position.
In the User Waypoint Edit page the user can edit all these
parameters. Highlight the Ident item, and the
CLEAR IDENT
soft key
becomes available to clear the current Ident name. Highlight the
