Bender UNIMET 300ST, Operating Manual

Page: 29 / 62

29 TGH1365en/10.2012
5. Testing and measuring
5.1 Testing via classification
5.1.1 Classification
Answer the questions that appear on the screen. The test system will identify the required tests and
limits to be observed. The guided test sequence will guide you through all the necessary steps to be
taken. In addition to electrical tests, the test sequence also contains a visual and functional test.
Example 1:
Classification of electrical equipment (e.g. angle grinders) according to DIN VDE 0701-0702 with the
UNIMET
®
300ST:
Main menu
1. Select “Classification”
2. Select the applicable test standard
e.g. "VDE0701-0702".
3. Select appropriate device type
and safety class,
e.g. “Class I”.
4. Select applicable cable length,
e.g. “Cable length <= 5 m”
5. Select appropriate device type,
e.g. “Standard equipment”.
Next to following page.
1. Exit
2. IEC62353:2007-05
3. VDE0701-0702:08-06
1. Exit
2. Class I
3. Class II
4. Class III
5. 3ph devices CI
6. 3ph devices CII
7. Extension cable
1. Exit
2. Cable length <=5mtr
3. Cable length > 5mtr
1. Exit
2. Standard equipment
3. EE w. heat. circ.
4. EE perm. installed
1. Classification
2. Device catalogue
3. Single test
4. Test eng. catalog
ESC
ESC
ESC
ESC