Bender UNIMET 1000ST Operating Manual Download Page 76

Page: 76 / 100

PC-compatible functions of the UNIMET® 1100ST

TGH1256en/10.2005

6.3 UniBackup software

6.3.1

System requirements

●

UNIMET® 1000ST/1100ST firmware version 4.20 or higher

●

UniBackup will run on IBM-compatible PCs with a Windows® 95/98, Windows® 2000 or
Windows® XP operating system.

6.3.2

Installing UniBackup

1. Download the software from http://www.bentron.de.

2. Unzip file UniBackupV1.1.zip.

3. Start the installation file UniBackupV1.1.exe and follow the installation instructions. You must

agree to the licence conditions in order to be able to install the software.

6.3.3

Starting UniBackup

1. Start the program (-> Start -> Programs -> UniBackup V1.1).

2. Select a language.

3. Set the baud rate and interface.

⇒

Summary of Contents for UNIMET 1000ST





































































































Search results

Summary of Contents for UNIMET 1000ST

Reviews:

Related manuals for UNIMET 1000ST

Brands by name

Popular brands

Bender UNIMET 1000ST, Operating Manual

Search results

Summary of Contents for UNIMET 1000ST

Reviews:

Related manuals for UNIMET 1000ST

Brands by name

Popular brands