Bender UNIMET 1000ST, Operating Manual

Page: 24 / 100

Operation and setting
24 TGH1256en/10.2005
4.5.2 Log in test engineer
[-> Main menu -> F5: System administration -> F1: Log in test engineer]
The names of the test engineers are stored in the test engineer names catalogue. The tester
whose name appears in the test protocol is logged on here. You should therefore set the test
engineer name before carrying out the first test: The test engineer names catalogue will be
empty the first time the test system is used.
The test engineer name catalogue can be useful if more than one person is working with the
test system. Test engineers already registered on the system are simply selected in the test
engineer name catalogue. There is no need to re-enter the test engineer’s name. Up to nine
test engineer names can be saved. The test engineer name can contain a maximum of
nineteen characters.
Press to open the alphanumeric input function. Enter a new test engineer name
using the keypad, software keypad or barcode scanner. Press Enter to confirm your entry.
Exit menu without making changes
,
Select the test engineer name. Press Enter to confirm your
selection. The name of the tester currently logged on is assigned
to all subsequent test results. The test engineer name can be
printed on the test protocol for a device, for example.
Delete selected test engineer name.
Open the alphanumeric input function (create new tester).
<<
+
+
⇒