Bender UNIMET 1000ST, Operating Manual

Page: 18 / 100

Operation and setting
18 TGH1256en/10.2005
4.3 Principle of operation
4.3.1 Calling up functions
Press the required function key. Press Enter to confirm your entries. The menus take you
through the individual functions.
4.3.2 Entering text and numbers
The following input screen will appear if entries need to be made:
Entries can also be made as follows:
●
Using the keypad
●
By selecting letters and numbers using the arrow keys (on-screen keypad)
●
Import via barcode scanner
Press Enter to apply the entries you make via the keypad or on-screen keypad. The Enter
key on the device and Enter on the keypad have the same function.
1 Selection menu (the example shows the main menu)
2 Current assignment of function keys:
F1
Branch to type catalogue
F2 Branch to device catalogue
Etc.
3 The Info key shows the telephone number of the BENTRON® hotline.
4 Function keys are used to activate each function.
5 Press Enter to confirm your entries.
i
F1 F2 F3 F4 F5
F1: Type catalogue
F2: Device catalogue
F3: Classification
F5: System administration
test engineer: W. Wacker
F4: Single test
User defined test
not registered
1
3
4
2
5