Safety instructions
10
accessories purchased from or recommended by the manufacturer of the equipment. Failure to
observe this requirement can result in fire, electric shock and injury.
●
Reference plates must always be clearly legible. Replace damaged or illegible plates
immediately.
2.5 Warranty and liability
In the event of physical injury or damage to property, no claims in respect of warranty or
liability can be accepted if such injury or damage can be attributed to one or more of the
following causes:
●
Not in accordance with its intended use
●
Incorrect assembly, commissioning, operation and maintenance
●
Operation of equipment with faulty safety devices or safety and protection devices which have
been fitted incorrectly or are not in perfect working order
●
Non-observance of instructions in this operating manual and the enclosed sheet entitled
"Important safety instructions for BENDER products" in respect of transport, storage and
assembly.
●
Constructional changes made by parties other than the manufacturer
●
Non-observance of technical data
●
Repairs carried out incorrectly and the use of replacement parts or accessories not approved by
the manufacturer
●
Catastrophes, uncontrollable external factors or force majeure
2.6 Guarantee
BENTRON
®
provides a guarantee of error-free design and perfect material quality lasting 36
months from date of delivery for the UNIMET® 1100ST test system when stored or operated
under standard conditions.
This guarantee does not cover maintenance work of any type whatsoever.
The guarantee is only valid for the first buyer and does not cover products or individual
components which have not been correctly used or to which changes have been made. Using
the test system other as for the intended purpose or under abnormal operating conditions
will render any guarantee null and void.
The guarantee obligation is restricted to repairing or replacing equipment returned to
BENTRON
®
within the guarantee period. In order for claims made under the terms of the
guarantee to be accepted, BENTRON
®
must acknowledge that the product is faulty and that
the fault concerned cannot be attributed to the incorrect handling or modification of
equipment, non-compliant use or abnormal operating conditions.
Any guarantee will be rendered null and void if repairs or changes have been made to
equipment by persons other than those authorised to do so by BENTRON
®
.
These guarantee provisions are valid exclusively and supersede all other contractual or legal
warranty obligations, including, but not restricted to, the legal warranty in respect of
marketability, fitness for purpose and serviceability for a specific application.
BENTRON
®
does not accept any liability for direct and indirect collateral or consequential
damage, regardless of whether this can be attributed to action considered permissible,
impermissible or otherwise.
Summary of Contents for UNIMET 1000ST
