Menu mode: Operation and setting
58
TM800_D00165_00_M_XXEN/06.2015
1. Use the arrow buttons to select the entry you require.
The latest entry appears first on the display. Older messages can be selected using the arrow
buttons.
2. Press the "
↵
" button to call up the message text of the selected entry. In the last line, the path
the message took to reach the TM800 is displayed. In this case an insulation fault was received
via the internal BMS bus from address 003, channel 01.
The table on the following page contains information about other possible displays.
3. If analogue values are displayed, as shown in the example above, the maximum and minimum
values can be displayed by pressing the "
" button.
4. Press the "
↵
" again to select an entry.
Repeat these operating steps for all messages you need. Then press "ESC" to exit the menu.
Possible displays in the last line of the history memory message text display:
Text Meaning
Address: ee/iii/kk
Address of the device triggering the message (ee = external BMS bus address, iii
= internal BMS bus address, kk= channel no. of message).
Digital Inp No kk
Number (kk) of the digital input on this TM800 which triggered the message.
TESTex
Note that the current history entry was created as the result of a test triggered
on this TM800.
TESTin
Note that the latest history entry was made due to a test initiated on the device
assigned to it (insulation monitoring device, LIM, GFCI).
Entry: 003/003
From: 04.12.11 16:00
Ack.: 04.12.11 16:00
to: 04.12.11 16:03
System: 01
Insulation fault
Meas. value:
Addr/Ch: 01/003/01
