Bender RCMA426H-DCB, Manual

Page: 17 / 40

17 RCMA426H-DCB_D00066_00_M_XXEN/05.2014
5. Operation and configuration
5.1 Getting to know the user interface
1 Green Power ON LED:
Lights up when the power supply volt-
age is connected and the device is run-
ning.
2 Red TPD alarm LED:
Lights up when the rated residual op-
erating current
I
Δ
n
is exceeded.
3 Yellow ERR alarm LED:
Flashes in the event of system errors.
An error code will appear on the dis-
play, e.g. E.03
4 DISPLAY:
Displays operating information.
5 ENTER (< 1.5 s) / MENU (> 1.5 s) button:
Press this button to apply entries and
changes and call up the menu.
6 DOWN (< 1.5 s) / RESET (> 1.5 s) button:
Press this button to reduce input val-
ues and navigate through the menu, as
well as to perform a reset.
7 UP (< 1.5 s) / TEST (> 1.5 s) button:
Press this button to increase input val-
ues and navigate through the menu, as
well as to run a manual self test.
Abb.5.1: User interface