Bender LINETRAXX PEM575 Series Manual Download Page 19

Page: 19 / 172

PEM735_D00084_00_M_XXEN/02.2015

4. Installation and connection

4.1 Project planning

For any questions associated with project planning, please contact Bender:
Internet: www.bender.de
Tel.: +49-6401-807-0

4.2 Safety instructions

Only electrically skilled persons are allowed to connect and commission the device.
Such persons must have read this manual and understood all instructions relating
to safety.

4.3 Installing the device

4.3.1

Dimension diagrams

Fig. 4.1: Dimension diagram PEM575 (front view)

Danger of electric shock!

Follow the basic safety rules when working with electricity.

Consider the data on the rated voltage and supply voltage

as specified

in the technical data!

DANGER

106

Summary of Contents for LINETRAXX PEM575 Series













































































































































































Search results

Summary of Contents for LINETRAXX PEM575 Series

Reviews:

Brands by name

Popular brands

Bender LINETRAXX PEM575 Series, Manual

Search results

Summary of Contents for LINETRAXX PEM575 Series

Reviews:

Brands by name

Popular brands