Bender LANTRAXX CMS460-D, Manual

Page: 47 / 88

Operation
47 CMS460-D_D00045_01_M_XXEN/07.2016
6.4.6.1 Settings menu 1: General
In this menu you make settings that apply to this device and therefore to all
measuring channels.
1.Fault memory
Faults that only occur temporarily can be saved.
on
After eliminating the cause of fault all alarm messages re-
main stored until a reset is carried out.
off CMS460-D exits the alarm mode as soon as the cause of fault
is eliminated.
2.Prewarning
Setting as a percentage of the response value. Setting range: 10…100 %, res-
olution of setting 1 %.
3.Hysteresis
If the measured value is relatively close to the response value, the CMS460-D
would constantly switch between the alarm and normal states. If a hysteresis
of 20 % is set, the alarm status is not exited until the measured value is 20 %
below or above the response value. Setting range: 2…40 %, resolution of set-
ting 1 %.
10.Clock Set date format, date, time and summer
time changeover. 60
11.Password Changing and activating the password. 60
12.Factory set-
ting Resets all settings to factory settings. 61
13.Service For Bender service only. 61
Menu item Function Page