Bender ISOMETER isoHV525, Manual

Page: 28 / 52

isoHV525-S4-4 parameter overview
28 isoHV525_D00297_04_M_XXEN/05.2018
5.3 Interface configuration
FAC = Factory setting; Cs = Customer setting;
( ) = User setting that is not modified by FAC
.
5.4 Time configuration
FAC = Factory setting; Cs = Customer setting;
Setting Description
Available
via
Range FAC Cs
BMS Modbus
0 / 3 … 90 3 ( ) BusAdr.
Adr = 0 deactivates BMS as well as Mod-
bus and activates isoData with conti-
nuous data output
(115k2, 8E1)
X X
--- /
1,2k … 115k
“ --- “ ( )
Baud
rate
“---“ --> BMS bus (9k6, 7E1)
“1,2k“ … “115k2“ --> Modbus (variable,
variable)
X X
8E1
8o1
8n1
8E1 ( )
M
o
d
b
u
s
8E1 - 8 Data bits
even parity, 1 Stop bit
8o1 - 8 Data bits
odd parity, 1 Stop bit
8n1 - 8 Data bits
no parity, 1 Stop bit
X
Para-
meter
Setting Description Available via
Range FAC Cs BMS Modbus
t 0 … 10 0 s
Start-up delay when starting the
device
X X
ton 0 … 99 0 s Response delay for K1 and K2 X X
toff 0 … 99 0 s Delay on release for K1 and K2 X X
test OFF / 1 / 24 24 h Repetition time for device test X X