Settings
Settings
isoHR685W-x-I-B_D00261_05_M_XXEN/12.2021
35
9.2
(3.1) TEST
Starts a manual device test.
9.2
(3.2) Reset
Reset of fault and alarm messages.
9.2
(3.3) Start initial measurement
All recorded measurements are discarded and a new measurement is started.
9.2
(3.4) EDS
Starts an insulation fault location process on the connected EDS device
9.2
(3.5) Device:
Insulation resistance measurement function of the ISOMETER® active or inactive:
9.2
(3.6) ISOnet priority
Assigns priority to a device in ISOnet mode for a period of 12 hours. While the priority is
active, all other devices in ISOnet mode are inactive. Priority can be withdrawn at any
time. After 12 hours, automatic switchover to normal ISOnet operation takes place.
9.2
(4.0) History
In the history menu, the faults detected by the ISOMETER® are displayed.
9.2
(5.0) Device settings
Basic settings of the ISOMETER®.
9.2
(5.1) Language
Selecting the display language:
9.2
(5.2) Clock
Setting the time and date display format.
9.2
(5.2.1) Time
Setting the time format to 24 hours or 12 hours am/pm.
•Aktiv
The device is active.
•Inaktiv
Display shows message
Device inactive
. No monitoring of the IT system!
•History
Overview of faults that have occurred.
•Delete
Reset the history memory.
Deutsch
Espanol
Norsk
Portugues
English (GB)
Francais
Polski
9.2
(5.2.2) Format (time)
Selecting the appropriate time format to be displayed:
9.2
(5.2.3) Summer time
Summer time can be considered in the following settings:
9.2
(5.2.4) Date
Entering the current date based on the time format.
9.2
(5.2.5) Format (date)
Select the date format that you want to be displayed:
9.2
(5.2.6) NTP
Select whether you would like to synchronise the current time via NTP. To use this func-
tion you must configure the NTP server
.
9.2
(5.2.7) NTP server
Set the IP address of the NTP server.
9.2
(5.2.8) UTC
Set the time according to UTC (coordinated world time). For Germany, set +1 for winter-
time (CET) and +2 for summer time (CEST).
•12 h
12-hour notation am/pm
•24 h
24-hour notation
•off
No automatic change between summer time and standard time.
•DST
Daylight Saving Time
Automatic time change according to North American regulation.
Start: Second Sunday in March from 02:00 a.m. to 03:00 a.m. (local time)
End: First Sunday in November from 03:00 a.m. to 02:00 a.m. (local time)
•CEST
Central European Summer Time
Automatic time change according to Central European regulation.
Start: Last Sunday in March from 02:00 a.m. CET to 03:00 a.m. CEST.
End: Last Sunday in October from 03:00 a.m. CEST to 02:00 a.m. CET.
•dd.mm.yy
day, month, year
•mm-dd-yy
month, day, year
•on
Synchronisation via NTP server is activated.
•off
Synchronisation via NTP server is deactivated.
