Bender FTC470XET, Operating Manual

Page: 48 / 84

Web server application examples
48 TGH1375en/02.2010
7.2 Parameter setting of an RCMS470-12 connected to the BMS bus
The menus and submenus are selected using the BMS Ex-
plorer. Using the BMS administration menu, as illustrated
on the left, you can set the parameters of a bus-capable
Bender device. At least one administrator password is re-
quired for parameter setting.
Prior to parameter setting, use the sub menu item
"Device information" to get a general idea.The majority of
the parameters of the device to be monitored can be rec-
ognised at a glance.
Prior to parameter setting, make sure that you have entered an administrator password. You
cannot access the required submenu items without having administrator rights.
7.2.1 Disabling a measuring input
During maintenance in a residual-current monitored circuit, the associated CT must not be
disconnected. For the duration of the maintenance operations the measuring input at channel
2 of the residual current evaluator RCMS470-12 with address 3 must be disabled.
1. Select: "Address 3: RCMS470-12“ from the main menu. The respective submenu will appear.
2. Now click on "Set function". A list displaying each channel with its associated function will appear.
Channel 2 still has the function overcurrent/residual current monitoring.
3. Use the mouse to activate the drop-down menu of channel 2 and select "disable channel“. Confirm
your actions with the "Save" button or stop your actions with "Cancel". If "Save" has been selected,
the message "Channel disabled" will appear.
Submenu: Set function
Channel 1 to 12: Function
- Overcurrent/residual current monitoring
- Undercurrent monitoring
- Disable channel