Operation
45
4.Type of system
Select the type of distribution system for the system being monitored.
The EDS460-DG must always be set to "DC" (factory setting).
6.4.3.2
Settings menu 2: Channel
You make the measuring channel settings in this menu (either individ-
ually or for all channels simultaneously). Selecting a measuring channel:
1. Use the "
S
" key to go to the measuring channel setting. Press the
"
↵
" key
2. Use the UP/DOWN keys to select a single measuring channel or all
measuring channels (1…12). Press "
↵
" to confirm your selection.
If the measuring channel settings only differ slightly, we
recommend to proceed as follows:
- First set all the channels (1…12) to the same value.
- Then modify the settings of individual channels.
Set
a single channel:
Set
all channels:
Channel: 1
Exit
1.Resp.value:4mA
2.CT: W/WR
Channel: 1..12
Exit
1.Resp.value:4mA
2.CT: W/WR
