11
VMD460-NA_D00001_05_M_XXEN/01.2020
2. Safety instructions
2.1 General safety instructions
Part of the device documentation in addition to this manual is the enclosed "Safety in-
structions for Bender products".
2.2 Work activities on electrical installations
If the device is used outside the Federal Republic of Germany, the applicable local
standards and regulations must be complied with.
Read the operating manual
before
starting to install, connect and
commission the device. After successful commissioning, keep the man-
ual within easy reach for future reference.
Only
qualified personnel
are permitted to carry out the work neces-
sary to install, commission and run a device or system.
DANGER
Risk of fatal injury from electric shock
Touching live parts of the system carries the risk of:
•
A fatal electric shock
•
Damage to the electrical installation
•
Destruction of the device
Before installing the device
and before working on the connections of
the device,
make sure that the system is
de-energised. The rules for
working on electrical systems must be observed.
