Bender ATICS Series, Manual

Page: 80 / 104

80 ATICS-DIO_D00080_03_M_XXEN / 04.2021
Menu mode: Operation and setting
7.3.4.10 Settings menu 10: Password
The device has two separate passwords for the "Settings" menu and the "TEST" menu.
Menu Description
Exit Exit settings menu "Password"; go up one menu level
1. Settings Change the password for the "Settings" menu, switch the password "on/off".
Factory setting:
Password:
000
Status: off
2. TEST Change the password for the "TEST" menu, enable/disable password.
Factory setting:
Password:
000
Status: off
Changing the password menu "Settings"
Menu Description
Exit Exit settings menu "Password - > Settings"; go up one menu level
1. Password Change the password for the "Settings" menu.
Setting range:
000 … 999
Resolution of setting: 1
2. Status Enable/Disable the password protection for the "Settings" menu
on
Password protection is enabled. When an attempt is made to
open one of the settings menus, the password entry screen
appears automatically:
Settings
Enter password:
0 0 0
After entering a valid password, all settings menus (except the
"Service" menu) are freely accessible until the menu mode is
exited.
off
Password protection is disabled.
Changing the password menu "TEST"
Menu Description
Exit Exit settings menu "Password - > TEST"; go up one menu level
1. Password Change the password for the "TEST" menu.
Setting range:
000 … 999
Resolution of setting: 1