F1900
40
MAINTENANCE
•
For changing the oil and other maintenance operations on the motor (spark plugs, air filter, regulations),
refer to the motor manual provided.
•
NB: To unscrew the oil drain plug of the motor, disassemble the rear cover (Pict. 7 Ref. “B”).
•
Make a regular check of the oil level in the gearbox with the cap (Pict. 4 Ref. “A”) and topping up if
necessary.
•
Change the oil completely every 200 hours. Empty the gearbox of oil by unscrewing the oil drain plug (Pict.
4 Ref. “C”)
•
Let the oil drain completely. After screwing back the cap tightly, fill to the correct level with new oil
recommended by the manufacturer. (Pict. 4 Ref. "A").
•
To improve the head functioning, lubricate it periodically through the greaser . (Pict. 11)
•
If the grass is not cut in a satisfactory manner despite the adjustments, the blade must be sharpened or
replaced. For replacement as follows :
1. Remove the cable of motor spark plug.
2. Put on a pair of gloves.
3. Unscrew the grass divider (Pict. 1 Ref. 6).
4. Loosen the 4 knife holder.
5. Remove the blade and put the new or the sharpened one, only after having greased it.
6. Rescrew the knife holder, adjusting them in such a way as the blade can slide well.
7. Fasten the grass divider and reapply the cable of the spark plug
Fasten the grass divider and reapply the cable of the spark plug
•
For any mechanical repair, especially during the warranty period, we recommend to go to a specialised
repair shop of the dealer.
•
For transporting convenience, the handles can be disassembled by means of the two knobs (Fig. 7 Ref. A).
The same is recommended for the cutting bar, which is easily disassembled by removing the special split
pin on the bar support (Fig. 8). Always use gloves and apply the protective strip to the blade.
•
Regularly check that screws are tight. Pay special attention to the screws fastening the bar to its support
WARRANTY
Our machines and accessories are guaranteed for 2 years excluding electric and rubber parts.
All the defective parts will be replaced free of charge excluding cost of labour and transport freight, which
would be at customer’s charge.
For any problem regarding the engine or any other part not of our production, please refer to the guarantee
conditions stated by the manufacturer and apply to their assistance centres.
For any kind of problem or repair please apply to the dealer where you bought the machine.
Summary of Contents for F 1900
Page 2: ...F1900 2...
