background image

BENADO EFFECTS

Thank  you  for  purchasing  the  BENADO  EFFECTS  pedalboard.  Owning  this  unit  will  give  you 
the ability to free yourself from clutter, weight and many other frustrations we guitar players have 
suffered for years without losing the quality of sound and build. 

On this pedalboard there are five basic effects that most guitar players use, and the effects are 
all analog.   How cool is that?   Oh, not to mention it's already 

buffered on the input level

, so 

you can look at it as six pedals in your board.  Every pedal was carefully designed to be the best 
and achieve a complete purity of the sound without diminishing your tone one little bit. 

A brief description of the effects is as follows:  Compressor (can act as a clean boost if needed), 
Distortion gives you that vintage warm great raw tube amp sound, Overdrive with wide range of 
options, Analog Delay and Spring Style Reverb. 

Below I'm including my favorite settings, which I'm using almost exclusively:

Compressor:

 all knobs set to 12:00 o'clock. (level knob changes from time to time to set 

volume right). This setting I'm using as my boost.   

Distortion:   

treble  all  the  way  up,  mids  3/4  way  up,  bass  10-12  o'clock,  volume  10 

o'clock, gain 1:00 o'clock.  

OD: 

tone  1:00  o'clock,  bass  11:00  o'clock,  switch  set  to  cream,  volume  10:00-11:00 

o'clock, gain 8:00-9:00 o'clock.   

Delay: 

delay all the way up, tone all the way down, repeats  9:00-10:00 o'clock, level set 

to bring the overall sound to match my reverb so I get an echo type of sound.  

Reverb: 

tone 12:00 o'clock, level 10:00-11:00 o'clock, depth 12:00 o'clock.

  

Do not use an adaptor with a higher output voltage than the specified 9V

   DC center pin negative. An adapter with an AC voltage output should
   never be used with the unit as it will permanently damage the unit.
   I recommend using the 

Visual Sound 1 Spot 9V DC Power Supply.

Warranty

Warranty  is  in  effect  for  2  years  from  day  of  purchase.  Repairs  during  this  time 
will  be  free  of  charge  due  to  manufacturing  defect  and  not  caused  by  the  end 
user. Upon receiving the unit, warranty repairs will be granted pending inspection 
of the unit. (There is a 7 day, no questions asked return policy, beginning on the 
date you receive your pedalboard. The cost of shipping will be at your expense, 
and  any  damages  caused  by  end  user  will  be  deducted  from  the  refund.    Units 
purchased from a dealer do not qualify for this 7-day no questions asked policy.  
If you purchased your pedalboard from a dealer contact them for store warranty 
policies).  Any  unauthorized  modifications  to  the  pedalboard  will  void  your 
warranty. Any  damage  caused  by  using  the  incorrect  adapters  mentioned  above 
will void your warranty.

You must register your board to validate the warranty on the website.

Summary of Contents for PB1










Reviews: