background image

Thank you for your purchase !

ASSEMBLY INSTRUCTIONS 

Before You Begin:

 

Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the 

components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching 

during assembly.

  

Caution:

  

Tighten all components securely before use. Failure to do so may result in personal injury.

  

DO NOT use any sharp objects to open plastic wrapped components as damage to product or componenets may 

result.

  

Warning:

  

CHOKING HAZARD - Small Parts. Adult Assembly Required.

  

lnjury may result from tipping furniture. You must installthe Tipping Restraint Hardware with the unit to prevent 

the unit from tipping and causing any accidental in.1ury, instability, death or damage. The tipping restraint is 

intended only as a safety measure, it is not a substitute for proper adult supervision.

  

This tipping restraint is not an earthquake restraint. lf you wish to add the extra security of earthquake 

restraints, they must be purchased and installed separately.

  

Serious or fatal crushing injuries can occur frorn furniture tipping over. To prevent furniture from tipping 

over it must be permanently fixed to the wall. Fixing devices for the wall are not included since different wall 

materials require different types of fixing devices. Use fixing devices suitable for the walls in your 

 

home

  

Failure to detach this restraint before moving furniture may result in injury or damage.

 

DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE

 

..................................................................................

Customer Service Email: 

[email protected]

 I Phone: 866-552-2810

 

YKC-1090-T-WAL-GG

 

/ YKC-1090-T-NAT-GG

 

WOODEN PLATFORM

 

BED FRAME

Summary of Contents for YKC-1090-T-WAL-GG








Reviews: