manualshive.com logo in svg

Belmont SP-CLEO II, Operating Instructions Manual, Page: 44 / 48

Share
Download
Belmont SP-CLEO II Operating Instructions Manual Download Page 44

- 40 -

Specification

Rated power supply -------------------------------------------------  AC.115V   7.7A/6.3A   50/60Hz
                                                                                                    AC.220V   3.5A/3.5A   50/60Hz
                                                                                                    AC.230V   3.4A            50Hz
                                                                                                    AC.240V   3.6A            50Hz   
Fuse -------------------------------------------------------------------  115V  F10A  125V
                                                                                                    220 - 240V   F5A  250V
Air main pressure ---------------------------------------------------  0.45 to 0.5MPa
Water main pressure ------------------------------------------------  0.1 to 0.2MPa
Mass ------------------------------------------------------------------  Cuspidor unit section : 74kg
                                                                                                    Doctor unit section : 40kg
                                                                                                   Chair section : 150kg
Dental light ----------------------------------------------------------  AL-720S / AL-520
                                                                                                   AL-820S / 900 Dental Light (Type 920)
Working environment ----------------------------------------------  Temperature : 10 to 40 

℃

                                                                                                    Humidity : 30 to 75%
                                                                                                    Atmospheric pressure : 700 to 1060hPa
Maximum Load -----------------------------------------------------  135kg

Classification

Operation mode ------------------------------------------------------  Short-time operating equipment (chair)

Classification of foot controller: -----------------------------------  IPX1(applicable standard IEC60529)
Classification of protection against electric shock --------------  Class I equipment, B type mounting section 

　　　　　　　　　　　　　　　　　　　　　　　　　( 

Upholstery and Handpieces )

Equipment that is not suitable for use in air, flammable anesthetic gas, oxygen or nitrous oxide

8. DIMENSION AND SPECIFICATION

Summary of Contents for SP-CLEO II

















































Reviews:

No comments