4. DESCRIPTION OF OPERATION AND FUNCTIONS OF COMPONENTS
- 27 -
Ｆ＝↓
ALARM TYPE＝０
０ １ ２ LP （３） PUSH
M LMT＝３STEP Ｆ＝↓
（－）＝３ (＋）＝５STEP
min.
sec.
(Example) Case where revolution is of "3 steps"
3 steps 5 steps
min.
sec.
SPRAY ＝２MODE Ｆ＝↓
（－）＝２ (＋）＝４ MODE
Example) Case of micromotor spray 2-modes
Selection of alarm sound upon time-up of dental timer
The alarm sounds on termination of timer time after countdown
of dental timer.
Four alarm patterns are provided, and even in case where
multiple chairs are installed in the same room, the chair from
which the alarm sounds can be easily identified if different
alarm patters are set.
[Procedure for setup]
1. Press the function switch six times.
2. Press a desired chair setup switch from and .
4. DESCRIPTION OF OPERATION AND FUNCTIONS OF COMPONENTS
Selection of number of steps of micromotor limit rotation
The number of steps of micromotor limit rotation can be
selected from 3 steps and 5 steps.
Case of 3 steps
Case of 5 steps
(The rotation values indicated above are given for reference
only.)
[Procedure for setup]
1. Press the function switch seven times .
2. Press the desired setup switch.
3 steps --- switch
5 steps --- switch
Selection of micromotor spray mode
Case of 2 modes
Micromotor spray on/off only.
Case of 4 modes
Micromotor spray on/off, water only and air only.
[Procedure for setup]
1. Press the function switch eight times.
2. Press the desired setup switch.
2 modes --- switch
4 modes --- switch
7
6
8