- 18 -
Cuspidor bowl flush switch
When this switch is pressed, water comes out of the bowl flush nozzle
and flushes the cuspidor bowl. The timer is set for about 5 seconds.
For continuous bowl flushing keep pressing this switch is for 2 seconds
or longer.
Press the cuspidor flush switch again for stopping flushing.
Water is supplied through the cupfiller nozzle when this switch is
pressed. Simultaneous with start-up of cupfiller motion, water comes
out of the bowl flush nozzle and flushes the cuspidor bowl.
* The cupfiller is timed for 3 to 4 seconds, and press the switch again
to stop in the middle. When the cupfiller switch is pressed, water
is supplied automatically for 3 to 4 seconds irrelevant to the water
volume in the cup. Watch the overflow. Do not press the switch while
the cup is not in place.
Cupfiller switch
5
6
Ｅ Ａ
Ｅ Ａ
Ｅ Ａ
Ｅ Ａ
Ｅ Ａ
Ｅ Ａ
Ｅ Ａ
Ｅ Ａ
4. DESCRIPTION OF OPERATION AND FUNCTIONS OF COMPONENTS
W (WATER)... GREEN
A (AIR) ......... ORANGE
2-Mode
4-Mode
Spray ON
Spray OFF
Spray
Water
Air
OFF
Switch for on/off the dental light.
* There are cases where this switch cannot be used depending on the
unit specification and the type of dental light.
Switch for on/pff the handpiece coolant spray.
When a handpiece is picked up and this switch is pressed, either LED A
(air) or LED W (water) located on the left-hand side or right-hand side
of the switch lights up, and indicates the selected function.
In case of air motor or air turbine, switching between spray (both of
LED A and LED W are lit) and OFF occurs when this switch is pressed.
In case of electric scaler, switching between water only (LED W is lit)
and OFF occurs when this switch is pressed, regardless of the mode.
In case of micromotor, either the 2-mode or the 4-mode can be selected
by mode select setup.
When this switch is pressed in the 2-mode setup, switching between
spray and OFF occurs.
In case of 4-mode setup, switching occurs in the sequence indicated
below each time when this switch is pressed: Spray to Water only to Air
only to OFF
Dental light on/off switch
Spray on/off switch
Switch for on/off the handpiece light.
Switching between on and off of the handpiece light occurs each time
when this switch is pressed.
Case where handpiece light is "ON"
(LED is lit in green.)
Handpiece light on/off switch
7
8
9
Ｅ Ａ
Ｅ Ａ
Ｅ Ａ
Ｅ Ａ
Ｅ Ａ
Ｅ Ａ