
- 9 -
4. DESCRIPTION OF OPERATION AND FUNCTIONS OF COMPONENTS
1. Chair Section
ON
OFF
Main Switch
Lit in green when the switch is on.
1-1. Main Switch
CAUTION
The armrest approaches the floor when the backrest is tilted as
shown to the left. Never operate the chair in the state where the
armrest is turned out of the normal working position. A part of
the human body or any other article may be caught between the
armrest and floor otherwise.
1
2
1-2. Armrest
Hold the armrest on the right-hand side, and release the
lock by pulling up the armrest diagonally backward (in a
direction that is parallel to the armrest axis) by about 1 cm.
(The lock is released when the armrest is pulled up to a
point where hitting sensation is felt.)
Turn the armrest to 9 o’clock direction. (The armrest can
turn by about 180 degrees.)
* For returning the armrest to the former position, observe the procedure, which is opposite to that of lock
release. That is, turn the armrest to the normal working position, and then lock the armrest in position by
pushing it down diagonally forward, which is opposite to the direction mentioned in item above.
Make sure to confirm that the armrest is in the locked safe position before use.
①
②
1
Bar
Headrest
Release Button
1) Height Adjustment
Press down or pull up the headrest to the desired height.
2) Angle Adjustment
Grasp the headrest release button on headrest mechanism
and move to desired position.
1-3. Headrest
CAUTION
Before moving the headrest, confirm that the patient is placing his/her head in a normal position,
and never leave the patient unsupervised while the headrest is in motion.
Do not use the headrest in a position where the patient feels painful.
Before moving the headrest, confirm that there is no obstacle around it lest a part of the human body
or any other article be caught between the headrest and backrest.