WARNING
Operation of a dental light under Electro Magnetic Interferences.
This equipment may malfunction by electromagnetic interferences.
Do not install dental light close to the equipment that generates electromagnetic interference
(i.e. communication equipment, elevator)
Do not use the device that creates interference (i.e. cellular phone) near this equipment.
Do not use electric surgical knife or laser knife with dental light.
Light may turns on/off by itself due to malfunction of a sensor caused by electromagnetic interferences.
WARNING
• To avoid the risk of electric shock, this equipment must only be connected to supply mains with protective earth.
• Lamp cover becomes very hot during use.To avoid burning fingers, do not a touch lamp cover.
• Always put a lamp cover on to avoid burning fingers.
• Position a light head by holding light handle(s).
• Installation and service work should be conducted by an authorized installation/service personnel only.
WARNING: The followings are prohibited.
• To modify this equipment.
• To use the equipment under any failure condition.
• To use the equipment without doing the daily and periodical check-up.
• To wipe the plastic covers with any disinfectant or detergent that contains organic solvent.
Precautions for Installation
• Keep the equipment away from water.
• Keep in circumstances safe from influence by temperature, humidity, wind, sun light, air containing salts
and minerals.
• Care about stability such as inclination, vibration and impact, including handling and transportation.
• Do not keep the equipment in a place where chemicals are or where gas is emitted.
• During lifting and unpacking of the light, make sure to hold only the designated parts.
• Do not drop or hit the light.
• Ground light properly prior to turning power on.
• When the installation process has been completed, verify that all the mechanical and electrical functions
are working properly.
• Thick gloves are highly recommended at unpacking.
• Do not modify this equipment.