DESCRIPTION OF OPERATION AND FUNCTIONS OF COMPONENTS
1
Doctor Unit Section
1
Doctor Unit Control Panel
Chair Manual Switch
Chair Preset Switch
Chair Auto Return Switch
Preset position setup procedures
1. Move the chair to the treatment position using
manual switches.
2. Upon deciding of the desired treatment position,
keep pressing preset switch < > , or < > to
be set for about 5 seconds. The buzzer sounds
from the chair, and setup has been completed.
3. To change the set position, perform the procedures
steps 1 and 2 above.
1
2
• When this switch is pressed, the chair moves
downward to the initial position, and the backrest
rises to upright position. Press any switches(chair/
unit) for stopping automatic movement.
• Switches provide manual operation for up/down
and backrest reclining/raising of the chair.
Press will move the chair up.
Press will move the chair down
Press will recline the backrest.
Press will raise the backrest.
Set the treatment position by chair
manual switch
Keep pressing preset switch to be
set for about 5 second
- Holder Type -
- Rod Type -
(Continental Type)
Cupfiller Switch
Cupfiller
Switch
Chair Control Switch
Chair Control Switch
• Set the chair height and backrest angle in desired
position(s), and actuate the chair by pressing < >
or < > switch. Press any switches (chair/unit) for
stopping the automatic movement.
1
2
12
11
Summary of Contents for CREDIA G1
Page 2: ......