DESCRIPTION OF OPERATION AND FUNCTIONS OF COMPONENTS
1
Doctor Unit Section
1
Handpiece
• The handpiece is actuated by picking it up from the handpiece holder and operating the foot controller.
Operation of the each handpieces, please refer to the manufacturer's instruction manual attached to the
individual equipment. (Recommend to use the handpieces with CE markings.)
Handpiece Pressure Gauge
• Displays the handpiece drive air pressure.
Flushout Switch
• Pick up the handpiece from handpiece holder and turn on the flushout switch to flush the handpiece
water line.
• During flushout, turn off the flushout switch will cancel flushout immediately.
Handpiece Light ON-OFF Switch
• Switching between on and off of the handpiece light occurs each time when this switch is changed.
Be sure to operate switches with your hands. If operate with other than hands may cause damage
or incorrect operation.
•
When the main switch is turned on, the MAIN LED on the doctor membrane switch panel lights up in
green. This state permits motion of the unit and chair.
* With no air supplied, this product does not operate even after turning on the main switch. Turn on the
power of the compressor before operating this product.
Main Switch
Flushout Switch
Handpiece Light
ON-OFF Switch
(Holder Type)
Handpiece Pressure Gauge
* Underside of
the doctor table
LED
- Holder Type -
- Rod Type -
LED
(Front side)
(Back side)
Handpiece Light
ON-OFF Switch
(Rod Type/Continental Type)
(Continental Type)
CAUTION
Main Switch
11
Summary of Contents for CREDIA G1
Page 2: ......