Belmont Clesta II, Operating Instructions Manual, Page: 26 / 40

-19-
Fig.5-1 Drain Cap, Basket Strainer,
and Cupfiller Base
5. CARE AND MAINTENANCE
Cleaning Unit
Cleaning and Sterilization of product exterior
Clean the metallic parts with a dry soft cloth. W ipe off water immediately if water is put on the product.
W ater may cause rusting.
Clean the resin parts with a wet soft cloth.
Use FD333 or FD366 made by Durr or ethanol for cleaning and bacteria elimination from the product
exterio r .
• When the surface of the control panel is cleaned with disinfectant, etc., wipe off disinfectant
completely. If it penetrates into the back of the sheet, the membrane switches may malfunction.
• Wipe off water and residual disinfectant immediately. This could cause corrosion, damage or
incorrect operation of the unit.
• Immediately wipe off any water spills or leakage on the fl oor. This could cause damage to the product,
decreased str ength of the floo r may lead to physical injury including fall, or property damage.
(1) Drain Cap, Basket Strainer , Cupfiller base, and Cuspidor Bowl
A. Detach the drain cap, and clean the basket straine r .
Remove the cupfiller base and clean it.
T urn the bowl flush nozzle counterclockwise,
avoiding the clash with the cuspidor bowl.
(Fig.5-1)
B. T urn the cuspidor bowl to left and right and remove
it upward. (Fig.5-2)
C. When it is hard to attach the cuspidor bowl after cleaning,
wet the inserting surface for an easy attachment.
After the attachment, make sure the cuspidor bowl is
attached firmly. (Fig.5-3)
D. After attaching the cuspidor bowl, return the bowl
flush nozzle to the original position and attach the
cupfiller base.
• Turn off the main switch before removing the cuspidor
bowl.
• Cuspidor bowl is made of glass or ceramic and may be
broken when given the impact. When and after removing
or attaching the cuspidor bowl, beaware of the handling,
avoiding the impact, hitting and falling.
When carrying the cuspidor bowl, hold it fi rmly with both
hands while placing one hand at the bottom of the cuspidor
bowl.
• Do not clean the cuspidor bowl using hot water because it
may be broken.
• Put on the durable gloves when cleaning.
Fig.5-2 Remove the Cuspidor Bowl
Fig.5-3 Attach the Cuspidor Bowl
Drain Cap
Basket
Strainer
Bowl Fush Nozzle
Cupfiller Base