g. Micro motor maximum speed setting (Optional)
The maximum rotation speed of the micro motor can be selected in 3 steps (10000,20000,40000 min
-1
(rpm)).
This function can be changed to 5 steps (5000,10000,20000,30000,40000 min
-1
(rpm) as follows:
Momentarily press the function switch seven times and press the increase switch.
To return to original setting.
Momentarily press the function switch seven times and press the decrease switch.
i. Cupfiller and bowl flush
Cupfiller and bowl flush are set to operate together (when the cupfiller switch is activated, bowl flush
also starts).
To make these operate independently.
Momentarily press the function switch nine times and press the decrease switch.
To return to original setting.
Momentarily press the function switch nine times and press the increase switch.
f. Electronic sound for timer
Electronic sound for timer can be changed.
Momentarily press the function switch six times.
Momentarily press one of chair auto mode switch (0,1,2,LP ) then the new electronic sound is to be memorized.
Function Switch
Chair Auto Mode Switch
Function Switch
Decrease Switch
Increase Switch
Function Switch
Decrease Switch
Increase Switch
0
1
2
LP
+
+
h. Coolant Water ON/OFF Switch
In case of micromotor, either the 2-mode or the 4-mode can be selected by mode select setup.
When this switch is pressed in the 2-mode setup, switching between spray and OFF occurs.
In case of 4-mode setup, switching occurs in the sequence indicated below each time when this switch is
pressed: Spray to Water only to Air only to OFF.
To set 2 mode
Momentarily press the function switch eight times and press the decrease switch.
To set 4 mode
Momentarily press the function switch eight times and press the increase switch.
+
Function Switch Decrease Switch
Increase Switch
Coolant Water
ON/OFF Switch
-13-