To clean and disinfect the exterior of the product, wipe the surface
with a soft cloth or paper towel moistened with FD366 manufactured
by Dürr, and then wipe it with a dry cloth.
If the exterior is excessively dirty, moisten a soft cloth with water
containing approx 10% of neutral detergent, and wipe the exterior
with the cloth. Then, wipe it with a cloth moistened with water and dry
it completely with a dry cloth.
Never use any of the products listed below:
Volatile chemicals such as paint thinner, butanol, isopropyl alcohol,
nail-varnish remover, gasoline, or kerosene; acid, alkaline or chlorine
detergents; highly corrosive disinfectants (povidone-iodine such as
Isodine, sodium hypochlorite, etc.); abrasive polishing wax or abra-
sive sponge
Do not use a brush or scrubber for maintenance. All of these may
leave scratches and/or ingrained dirt.
If water or detergent is left on the surface, wipe it off immediately.
Moisture or detergent may cause rust or failure of electrical parts.
Do not spray detergent directly onto the exterior.
Clean the surface with a soft cloth or paper towel moistened with
detergent, and wipe it dry with a cloth.
If liquid enters the product, it may cause a malfunction or failure.
Confirm that the detergent has completely dried off before activating
the product.
5-1
Exterior
5-1-1
Cleaning and disinfecting the surfaces
5 Maintenance and Cleaning by Dental Staff