Belmont BELRAY II 097 Operator Instructions Manual Download Page 4

-2

-

 

 

6. SYMBOL 

In this book, on the labels or on the control panel of 

the 

BELRAY II MODEL 097, following 

symbols are used.  Confirm the meaning of each symbol.

 

 

 

 

7. SAFETY 

This X-ray unit may be dangerous to patient and operator unless safe exposure factors,  
operating instructions and maintenance schedules are observed. 
Only qualified and authorized personnel may operate this equipment observing all laws and 
regulations concerning protection against x-ray radiation.

       The operator must :

 

       • have means for audio and visual communication with the patient.

 

       • have full view of kV, mA, timer selections and exposure warning light.  

 

 

• 

be at least 2 m away from the x-ray head and patient and out of the path of the x-ray beam

 

 or be positioned behind a protective device.

       • fully use all radiation protection devices, accessories and procedures available to protect the
          patient and operator from x-ray radiation. 

 

 

Protection 
against electric 
shock : Type B

 

ON (POWER)

 

 

OFF (POWER)

 

 

 

 

Protection 
Grounding 

 

 

 

Exposure 
Switch 

 

X-ray 
Emission 

 

 

 

 

Ready 

 

 

 

Upper Incisor 

 

 

 

Upper Cuspid
& Pre Molar 

 

Upper Molar 

 

 

Occlusal 

 

 

 

 

Lower Incisor 

 

 

 

 

Lower Cuspid
& Pre Molar 

 

Lower Molar
& Bite Wing 

 

 

Bite Wing 

 

 

Digital 
Imaging 

 

 

Patient 

 

Child 

 

Patient 

 Adult

 

 

 

Patient 

 Large Adult

 

 

 

Regular 
Cone 

 

 

Long 
Cone 

 

Non-ionizing

Radiation

 

 

 

Date of

 

Manufacture

 

 

Consult written

Instructions in

Manuals

 

California proposition 65

 

Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

 

 

WARNING

Summary of Contents for BELRAY II 097

















Reviews: